Tel: +86-18638759011 E-mail: inquiry@rsxwrefractory.com

$OurBlog-Page11of107-TrustedRefractoryMaterialsManufacturerandSupplier-Page11$

Náš blog

Domov

Náš blog

$Refractory materials for aluminum smelting furnaces$

Refractory materials for aluminum smelting furnaces

2024-04-10 Náš blog

Aluminum smelting furnaces mainly include reverberatory furnaces, rotary drum furnaces induction furnaces, atd. The operating temperature is generally 700-1000°C. The damage to the lining of this type of furnace is mainly caused by the penetration and erosion of molten aluminum. The lining is generally made of clay bricks, high alumina…

Read more
What are the advantages of an aluminum silicate board?

2024-04-08 Náš blog

Aluminum silicate board can be called ceramic fiber board or ceramic wool board. It is made of ceramic fiber (aluminum silicate) by dry method and is a good refractory insulation material.

Read more
Introduction to the reverberatory furnace in the metallurgical industry

2024-03-29 Náš blog

A reverberatory furnace is a chamber-type flame furnace. Fuel is burned in the combustion chamber, and the generated flame is reflected from the top of the furnace to the heating chamber to heat the billet. The heat transfer method in the furnace relies not only on the reflection of the…

Read more
What is the raw material composition of AlSiC-brick?

2024-03-27 Náš blog

AI203-SiC-C brick (ASC brick ) is one of the commonly used refractory materials for thermal equipment in the pretreatment stage of molten iron. Especially in molten iron, its usage rate is very high. ASC bricks have very good high-temperature properties and resistance to oxidation, spalling, and slag erosion. They can…

Read more
What are the uses of sillimanite raw materials?

2024-03-25 Náš blog

Sillimanite is an excellent refractory raw material used to produce high-alumina bricks with low creep, high load-softness, high thermal shock brick micro-expansion and electric furnace roofs, phosphate-bonded high-alumina bricks for cement rotary kilns, atd. Also used in glass, ceramics, technical ceramics, special coatings, and other industries.

Read more
Application of zircon bricks in glass kiln

2024-03-19 Náš blog

Zircon bricks for glass kilns are mainly made by sintering a single zircon stone. To improve the performance of zircon bricks, other ingredients (such as zirconia, high alumina bauxite, fused corundum, chromium oxide, atd.) are added ) to special zircon bricks.

Read more

+86-18638759011

+86-18638759011

dotaz@rsxwrefractory.com