Tel: +86-18638759011 E-mail: inquiry@rsxwrefractory.com

$OurBlog-Page4of122-TrustedRefractoryMaterialsManufacturerandSupplier-Page4$

Náš blog

Domov

Náš blog

Rozdíl mezi cihlou magnesia uhlíkovou cihlou a hlinitými magnézie uhlíková cihla

2025-03-07 Náš blog

In the field of refractory materials, magnesia carbon brick and alumina magnesia carbon brick are two common high-performance materials, which are widely used in high-temperature equipment in industries such as steel, cement, and glass. Although they have similar names, they have significant differences in composition, performance, and application scenarios. magnézie…

Přečtěte si více
Lev3 High Alumina Brick Úvod

2025-02-25 Náš blog

Lev3 high alumina brick is one of the common refractory materials, which are formed and calcined from bauxite or other raw materials with high alumina content. Lev3 high alumina brick Characteristics of grade 3 high alumina bricks Chemical composition: AI203 content should be between 50% a 70%, Si02 content should…

Přečtěte si více
Konstrukční metoda materiálu suchého běhacího materiálu pro dno elektrické pece

2025-02-24 Náš blog

The bottom of the electric furnace is a key part of the electric furnace that withstands pressure, thermal shock, and corrosion. In order to ensure the stability and durability of the bottom of the electric furnace at high temperatures, dry ramming material is usually used for construction. Dry ramming mass…

Přečtěte si více
Jaké odchody se používají v různých částech cementové pece?

2025-02-22 Náš blog

Cement kilns are subjected to high temperatures, high corrosion, and severe thermal shock during cement production. The use of appropriate refractory castables can ensure the long-term stable operation of the kiln. The refractory castables selected vary according to the working conditions and temperatures of different parts of the cement kiln.

Přečtěte si více
Analýza příčin poškození obložení obloukové pece

2025-02-19 Náš blog

During the smelting process, the arc furnace body is in a high-temperature state, and the furnace lining is constantly subjected to chemical and mechanical erosion at high temperatures. After each furnace of steelmaking, the refractory lining of the arc furnace is damaged to varying degrees. Proto, the furnace must be…

Přečtěte si více
$Refractory Clay Introduction$

Refractory Clay Introduction

2025-01-23 Náš blog

Refractory mortar is also called fire clay. There are two specifications of refractory mortar, bagged and barreled—uses: žáruvzdorné cihly. The material is matched according to the bricks to be built. It is recommended that the material content of the mortar is higher than that of the bricks, which will be…

Přečtěte si více

+86-18638759011

+86-18638759011

dotaz@rsxwrefractory.com