Tel: +86-18638759011 E-post: inquiry@rsxwrefractory.com

Umbes Võtke ühendust |

$OurBlog-Page4of119-TrustedRefractoryMaterialsManufacturerandSupplier-Page4$

Meie ajaveeb

Kodu

Meie ajaveeb

What castables are used in different parts of cement kiln?

2025-02-22 Meie ajaveeb

Cement kilns are subjected to high temperatures, high corrosion, and severe thermal shock during cement production. The use of appropriate refractory castables can ensure the long-term stable operation of the kiln. The refractory castables selected vary according to the working conditions and temperatures of different parts of the cement kiln.

Loe edasi
Analysis of the Causes of Damage to Arc Furnace Lining

2025-02-19 Meie ajaveeb

During the smelting process, the arc furnace body is in a high-temperature state, and the furnace lining is constantly subjected to chemical and mechanical erosion at high temperatures. After each furnace of steelmaking, the refractory lining of the arc furnace is damaged to varying degrees. Therefore, the furnace must be…

Loe edasi
$Refractory Clay Introduction$

Refractory Clay Introduction

2025-01-23 Meie ajaveeb

Refractory mortar is also called fire clay. There are two specifications of refractory mortar, bagged and barreled—uses: tulekindlad tellised. The material is matched according to the bricks to be built. It is recommended that the material content of the mortar is higher than that of the bricks, which will be…

Loe edasi
$Excellent performance of magnesium aluminum refractory materials$

Excellent performance of magnesium aluminum refractory materials

2025-01-21 Meie ajaveeb

Magnesium-aluminum refractory is a refractory material made of magnesia (magnesium oxide) and bauxite (aluminum oxide) as the main raw materials, which is widely used in high-temperature industrial fields. Due to its unique chemical composition and remarkable physical properties, this material has irreplaceable advantages in many high-temperature environments.

Loe edasi
What are the advantages and disadvantages of kiln clay bricks?

2025-01-20 Meie ajaveeb

Kiln clay bricks are one of the commonly used refractory materials in kilns. Due to their abundant raw material sources, good performance, and moderate cost, they are widely used in the lining of various industrial kilns. The following is an analysis of the advantages and disadvantages of clay bricks in…

Loe edasi
Advantages of ladle covering agent

2025-01-15 Meie ajaveeb

Ladle covering agent is a material used to cover the surface of molten steel during steelmaking. Its main functions are to reduce heat loss, reduce oxidation of molten steel, and absorb and separate inclusions. With the advancement of metallurgical technology, the use of ladle covering agents has become an important…

Loe edasi

+86-18638759011

+86-18638759011

inquiry@rsxwrefractory.com